Our Electrical Rewiring Projects in Singapore

Completed rewiring and electrical projects across Singapore, from HDB resale flats and condos to landed homes, shopfronts, offices and JTC factory units.

  • BCA-registered
  • bizSAFE Level 4
  • LEW-coordinated
  • SP testing & handover
Completed rewiring in a Singapore condominium with new distribution board and power points in a finished living room
4-Room HDB Resale Full Rewiring - Pasir Ris - HDB - 4 Room - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
Finished office lighting by Best Volt, coloured geometric pendants lit over the desks with the city beyond a glass facade.

Registrations and Certificates You Can Check

  • BCA CoreTrade Statement of Registration for Electrical Works (Tradesman), Reg. No. CTW-ELW-550-0819-C, valid till 27 June 2027.
  • bizSAFE Level 4 certification logo — Singapore’s workplace safety and health programme.
  • Electrical Technician’s Licence issued by the Energy Market Authority of Singapore under the Electricity Act, valid for the lifetime of the licence holder.
  • BCA Registered Contractor badge — registered with the Building and Construction Authority of Singapore.
  • Certificate of Attendance awarded by Fonda Global Engineering Pte Ltd, a BCA Approved Training & Testing Centre in Singapore, for successfully completing the CET course in Electrical Works on 20 June 2018.
  • LEW — Licensed Electrical Worker badge, Singapore.
  • Energy Market Authority (EMA), Singapore logo — “Our Clean Energy Future”.

Every Project Tested, Documented and Handed Over

BestVolt Contractors Pte. Ltd. carries out rewiring and electrical works across Singapore, from HDB resale flats and landed houses to condominiums with MCST approval, F&B shopfronts, offices and JTC industrial units with MDB upgrades.

Every project is planned around the right approvals and testing, with LEW coordination, SP testing and CS3 or JTC submissions where the scope requires them.

  • LEW coordinationWorks planned and endorsed with a licensed electrical worker where required
  • SP testingArranged through our LEW before the supply is turned on
  • Approvals handledHDB permits, MCST approval, CS3 and JTC submissions
  • Documented handoverLabelled DB schedule and test records at the end of the job

Completed Rewiring Projects Across Singapore

Filter by property type, then open any project to see the site photos, the scope of work and the details behind each job.

LandedLanded House

Full House Rewiring - Jade Residences - Lew Lian Vale

1 Lew Lian Vale, Jade Residences, Singapore

Complete full house rewiring for a 3-storey landed house at Jade Residences, including a DB upgrade, concealed wiring and smart power points.

  • Full rewiring across 3 storeys
  • 2x DB box upgrade with RCCB
  • Concealed wiring throughout
HDBHDB - 4 Room

4-Room HDB Resale Full Rewiring - Pasir Ris

244 Pasir Ris Street 21, HDB

Full rewiring for a 4-room resale HDB flat at Pasir Ris St 21: HDB permit, concealed wiring, new DB, SP testing and 25+ points.

  • HDB hacking permit applied
  • Full concealed wiring
  • New DB box with RCCB
HDB Rewiring
CondoCondominium

Condo Rewiring & DB Upgrade - Affinity at Serangoon

40 Affinity Serangoon North, Condo

Condo rewiring at Affinity Serangoon with MCST approval: concealed wiring, DB replacement, aluminium rail lighting and USB-C points.

  • MCST approval managed
  • Full concealed wiring
  • DB box with RCCB
Condo Rewiring
IndustrialIndustrial - JTC

Industrial Electrical Wiring - JTC Tampines Street 93

JTC 9010 Tampines Street 93, Singapore 528844

Industrial wiring for a JTC unit at Tampines Street 93: MDB, sub-DB, 3-phase machinery circuits, CS3 submission and JTC diagram endorsement.

  • MDB upgrade
  • 3-phase sub-DB
  • Machinery power circuits
HDBHDB - 4 Room

HDB Rewiring - Punggol Drive 635A

Blk 635A Punggol Drive, HDB

Complete HDB rewiring for a 4-room flat at Punggol Drive: concealed wiring, DB upgrade, extra power points and SP testing.

  • Full concealed rewiring
  • DB with RCCB
  • 28 power points
HDB Rewiring
CondoCondominium

Orchid Park Condo - Full Rewiring & Power Points

81 Yishun Street 81, Orchid Park Condo

Complete rewiring for an Orchid Park condo unit in Yishun, focused on extra power points, concealed wiring and a modern DB with safety protection.

  • Full unit rewiring
  • DB upgrade with 2nd RCCB
  • 30+ power points
Condo Rewiring
HDBHDB - BTO 4 Room

BTO New Wiring - Tampines North Drive 1

Blk 609A Tampines North Drive 1, BTO

First-time electrical wiring for a 4-room BTO flat at Tampines North: bare unit wiring, concealed conduits, DB dressing, data points and USB sockets.

  • Bare unit new wiring
  • Concealed conduit
  • DB box dressing
HDB Rewiring
LandedLanded House

Complete Electrical Rewiring - Jalan Mata Ayer

24 Jalan Mata Ayer, Sembawang

Full rewiring for a 2-storey landed home at Jalan Mata Ayer: modern copper wiring, a new DB and outdoor lighting circuits.

  • Full house rewiring, 2 storeys
  • Main DB + sub-DB
  • Outdoor gate and garden lights
IndustrialIndustrial - Factory

Industrial Unit Wiring - TENET 87 Tampines

TENET 87 Tampines North Street 62, Industrial

Industrial electrical works at TENET 87 Tampines North: sub-DB, machinery circuits, office wiring and JTC compliance.

  • Sub-DB installation
  • 3-phase circuits
  • Office + warehouse wiring
HDBHDB - 3/4 Room

HDB Resale Rewiring - Telok Blangah Crescent

8 Telok Blangah Crescent, HDB

Old HDB flat rewiring at Telok Blangah Crescent: full replacement of aged wiring, a new DB, a safety upgrade and a power trip fix.

  • Full old wiring replacement
  • New DB with RCCB
  • Power trip fixed
HDB Rewiring
IndustrialIndustrial - Factory

Factory Wiring - TENET 71 Tampines North

TENET 71 Tampines North Street 62, Industrial

Factory unit wiring at TENET 71 Tampines: a new distribution board, 3-phase circuits and power points for the office and production area.

  • DB upgrade
  • 3-phase power
  • Office + factory circuits
CommercialIndustrial / Commercial

Commercial & Industrial Wiring - Ubi Avenue 1

337 Ubi Avenue 1, Ubi, Singapore

Commercial and industrial wiring at Ubi Avenue 1: DB replacement, office power points, lighting and testing for business use.

  • DB box replacement
  • Office power points
  • Lighting circuits
CommercialCommercial unit

SP Group Smart Meter & Meter Board

Commercial unit, Singapore (block and unit not published)

BestVolt set a single-phase CHNT/Itron SP Group smart meter on a timber board in a Singapore commercial unit, with isolators, an earth bar, the board drawing and a new consumer unit beside the board. A meter package, not a full-unit rewire.

  • SP Group single-phase smart meter set on a timber board
  • Isolators either side, earth bar above, drawing kept on the board
  • New Cm consumer unit and isolator beside the meter board
DB Box Upgrade
CommercialCommercial unit and F&B unit

Distribution Board Wiring & Mounting

Two Singapore sites: the meter-board commercial unit and the Audanis Bakes unit

Distribution-board craft by BestVolt, shown on two separate Singapore sites, not one address. Open-board termination and labelled pulls in a commercial unit, then a surface wall DB, isolators and a ceiling conduit drop in the Audanis Bakes unit.

  • Open-board termination in the meter-board commercial unit
  • Circuit labels at the MCB row, including L1P1 and socket L2P4
  • Cable coils pulled up to that board, trunking already on the wall
DB Box Upgrade
F&BF&B tenancy

Audanis Bakes - Shopfront & F&B Fit-Out

Audanis Bakes, unit 01-07, Singapore (building name not published)

Shopfront and first-fix electrics for Audanis Bakes, unit 01-07, Singapore. BestVolt handled the night shopfront, the overhead enclosure, ceiling services at the gypsum partition and a green EXIT sign on the security grille. Not a full-unit rewire.

  • Night shopfront with the Audanis Bakes sign on and the shutter down
  • Wall point in the white shell, under the sign at unit 01-07
  • Overhead ceiling enclosure opened and worked from a ladder
CondoCondominium

Double-Volume Feature Lighting & LED Cove

Private condominium, double-volume living, Singapore (address not published)

Double-volume feature lighting in a Singapore condominium. BestVolt set a recessed niche with vertical LED coves, worked from scaffold to the mezzanine, and lit a wood-slat wall. Architectural lighting, not a full condo rewire. Same home as the bedroom cove project.

  • Recessed feature niche with a vertical LED cove each side
  • Scaffold carried to mezzanine height for the double volume
  • Floor-to-ceiling glazing and high-wall air-con coordinated around the work
CondoCondominium

Bedroom Cove Ceiling, Fan Point & Switch Drops

Private condominium, bedrooms and hallway, Singapore (address not published)

Bedroom cove lighting, fan points and a hallway switch drop in the same Singapore condominium as the double-volume project. BestVolt finished cove, fan and downlights in more than one room, and kept one honest frame from before the final cable fix.

  • Finished cove ceiling with fan and downlights, three-panel window
  • Second room: full-height window, cove, fan, two-gang switch
  • Third room: balcony slider, cove lit, switch in place
ResidencePrivate residence

Luxury Residence Feature Lighting

Private residence, Singapore (address not published)

Feature lighting in one private Singapore residence. BestVolt set a glass-globe chandelier under the skylight, a warm LED TV wall, cove and pendants, staircase tread lights and under-cabinet kitchen lighting. A lighting fit-out, not a full rewire.

  • Glass-globe chandelier in the double height, with gold linear LED
  • Television wall: wood slat, warm LED niche, cove, fan, track lights
  • Living cove and marble-wall pendant
ResidencePrivate residence

Concealed Wiring, Chasing & Smart Switch

Private residence, Singapore (address not published)

Concealed wiring in the same private residence as the feature-lighting project. BestVolt chased the wall beside the marble and the partition, then finished on a three-gang smart switch with a blue indicator on each gang.

  • Wall chase cut, with paper catch and tape at the opening
  • Rotary-hammer chasing, stair and kitchen of this house in frame
  • Chase run beside the marble feature wall
Concealed Wiring
OfficeOffice

Office Lighting Fit-Out

Office, Singapore (address not published)

Office lighting fit-out on one Singapore floor. BestVolt coordinated open-ceiling services, mounted linear fittings from a ladder, dressed cable drops before the ceiling closed, and left coloured geometric pendants lit over the desks, with a green EXIT sign on the floor.

  • Coloured geometric pendants lit over the desks
  • Floor coordinated with cassette air-con and a green EXIT sign
  • Open ceiling: black pipes, conduit and cable set out
CommercialUnit with steel mezzanine

Mezzanine Lighting & High-Access Installation

Unit with a steel mezzanine, Singapore (address not published)

Mezzanine lighting and high-access work in one Singapore unit. BestVolt set linear fittings from a Genie scissor lift, ran trunking on the black steel mezzanine, and left rows of tube lights on in the empty unit. Lighting scope, not a factory rewire.

  • Linear fitting set from a Genie GS-1930 scissor lift
  • Crew working the black steel mezzanine, ladder and lift in frame
  • Trunking and conduit run on top of the mezzanine
ResidentialResidences, more than one

Lighting Layout, Laser Set-Out & Feature Fittings

Several Singapore residences (service gallery, not one address)

A lighting-layout gallery by BestVolt, drawn from several Singapore residences, not one address. Hand-drawn switch layout, green-laser downlight set-out, then finished fittings: wall sconces and fan, a wall-wash LED and a linear ceiling LED.

  • Hand-drawn light and fan layout beside a three-gang switch
  • Downlight openings set out with a green laser line
  • Finished fan and two black wall sconces, a separate room
ResidentialMixed residential

Kitchen, Bathroom, Air-Con Power & Protection

Several Singapore sites (service gallery, not one address)

Kitchen, bathroom, air-con power and protection by BestVolt, a service gallery, not one address. A bathroom LED niche, a white-cabinet kitchen with two Mitsubishi air-cons, an older-flat air-con connection, an RCBO test on existing gear and a door-head emergency light.

  • Bathroom mirror cabinet with a warm LED niche
  • Kitchen final fix with two Mitsubishi air-con units and a linear LED
  • Air-con power connection in a separate, older flat
MixedMixed: F&B, commercial and residential

Containment, Partition First Fix & Making Good

Several Singapore sites (service gallery, not one address)

Containment, first fix and making good by BestVolt, a method gallery, not one address. Partition openings, a trunking joint sealed above a consumer unit, a ceiling-point final connection, conduit routes in an empty resale room and an exit-grille frame sealed after a shopfront fit-out.

  • Gypsum partition openings and joint-compound patches, F&B first fix
  • Trunking joint sealed above a Cm consumer unit
  • Ceiling-point final connection, cable loom dressed at the opening
Full House Rewiring - Jade Residences - Lew Lian Vale - Landed House - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
LandedLanded Rewiring

Full House Rewiring - Jade Residences - Lew Lian Vale

Location
1 Lew Lian Vale, Jade Residences, Singapore
Property type
Landed House
Completed in
5 days
Compliance
LEW testing, insulation resistance checks, labelled DB schedule

This 3-storey landed house at Jade Residences, Lew Lian Vale required a complete rewiring due to 20+ year old aluminium cables and an overloaded single DB. BestVolt replaced all aluminium with copper cables sized per SS 638, installed 2 new distribution boards with RCCB protection and 32 clearly labelled circuits. Works included full concealed wiring before plastering, 35+ power points with USB-C plates, aluminium rail for cove lighting, and outdoor gate and garden circuits. The job was completed in 5 days with LEW testing, insulation resistance checks, and a full DB schedule at handover. An ideal reference for landed house owners needing 3-phase readiness.

What we did

  • Full rewiring across 3 storeys
  • 2x DB box upgrade with RCCB
  • Concealed wiring throughout
  • 35+ power points incl. USB-C
  • Aluminium rail for feature lights

Related services

4-Room HDB Resale Full Rewiring - Pasir Ris - HDB - 4 Room - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
HDBResidential HDB Rewiring

4-Room HDB Resale Full Rewiring - Pasir Ris

Location
244 Pasir Ris Street 21, HDB
Property type
HDB - 4 Room
Completed in
4 days
Compliance
HDB permit, SP testing via LEW

A classic 4-room HDB resale flat at Pasir Ris Street 21 that needed full rewiring before renovation. BestVolt applied for the HDB hacking permit, carried out wall chasing, and laid concealed PVC conduits for all power and lighting circuits. Old PVC cables were replaced with 2.5mm copper for power and 1.5mm for lighting. A new DB with RCCB, 25 power points including a 20A kitchen circuit for the oven and hob, and a separate water heater circuit were installed. SP testing was arranged via our LEW and cleared in 2 days. The project was completed in 4 days, ready for carpentry.

What we did

  • HDB hacking permit applied
  • Full concealed wiring
  • New DB box with RCCB
  • 25 power points + lighting
  • SP testing clearance

Related services

Condo Rewiring & DB Upgrade - Affinity at Serangoon - Condominium - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
CondoCondo Rewiring

Condo Rewiring & DB Upgrade - Affinity at Serangoon

Location
40 Affinity Serangoon North, Condo
Property type
Condominium
Service
Condo Rewiring
Compliance
MCST approval, earth continuity and insulation resistance tests, test report

Affinity at Serangoon North is a private condo with strict MCST rules: no hacking, working hours of 9am to 5pm, and approval required for DB works. BestVolt managed the MCST submission and completed full concealed rewiring via the false ceiling and existing conduits. Scope included a DB box replacement with RCCB plus a 2nd RCCB for high-load circuits, 28 power points with USB-C, an aluminium rail with LED strip for the living room feature wall, and smart switches. All works were tested for earth continuity and insulation resistance. Handover included a test report and labelled DB schedule.

What we did

  • MCST approval managed
  • Full concealed wiring
  • DB box with RCCB
  • Aluminium rail + LED strip
  • 28 power points with USB-C

Related services

Industrial Electrical Wiring - JTC Tampines Street 93 - Industrial - JTC - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
IndustrialIndustrial Rewiring

Industrial Electrical Wiring - JTC Tampines Street 93

Location
JTC 9010 Tampines Street 93, Singapore 528844
Property type
Industrial - JTC
Service
Industrial Rewiring
Compliance
CS3 and JTC submission, LEW endorsement, insulation resistance, earth continuity and RCCB tests

This industrial unit at JTC 9010 Tampines Street 93 needed an MDB upgrade and 3-phase machinery circuits. BestVolt planned the works around a weekend shutdown to avoid production loss. Scope covered a 100A 3-phase MDB upgrade, sub-DB installation, heavy-duty cabling for 3 machines, metal trunking and cable tray, and emergency lighting circuits. The CS3 submission and JTC electrical diagram submission were handled with LEW endorsement. Insulation resistance, earth continuity and RCCB tests were carried out, and as-built diagrams were submitted to JTC.

What we did

  • MDB upgrade
  • 3-phase sub-DB
  • Machinery power circuits
  • Metal trunking
  • CS3 + JTC submission
  • LEW endorsement

Related services

HDB Rewiring - Punggol Drive 635A - HDB - 4 Room - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
HDBHDB Rewiring

HDB Rewiring - Punggol Drive 635A

Location
Blk 635A Punggol Drive, HDB
Property type
HDB - 4 Room
Completed in
3.5 days
Compliance
HDB permit, LEW testing, SP clearance

A 4-room HDB flat at Punggol Drive 635A with ageing wiring and power trip issues. BestVolt completed full concealed rewiring under HDB permit, with a new DB with RCCB protection, 28 power points including extra points for the aircon and water heater, and LED lighting points. Wall chasing was done neatly using the HDB-approved method, followed by LEW testing and SP clearance. The project was completed in 3.5 days, a useful local reference for Punggol and Sengkang HDB owners.

What we did

  • Full concealed rewiring
  • DB with RCCB
  • 28 power points
  • Lighting points
  • SP testing

Related services

Orchid Park Condo - Full Rewiring & Power Points - Condominium - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
CondoCondo Rewiring

Orchid Park Condo - Full Rewiring & Power Points

Location
81 Yishun Street 81, Orchid Park Condo
Property type
Condominium
Service
Condo Rewiring
Compliance
MCST approval, LEW testing, earth continuity tests

This unit at Orchid Park Condo, Yishun Street 81, had an old DB without RCCB protection and too few points for modern appliances. BestVolt upgraded to a new DB with a 2nd RCCB, added 3 dedicated aircon circuits and a 20A circuit for the induction hob, and installed 30+ power points with concealed wiring. The kitchen and bedrooms received extra USB-C sockets. MCST approval and riser access were coordinated, followed by final LEW testing and handover with circuit labels. The project shows how high-load circuits can be added safely in a condo.

What we did

  • Full unit rewiring
  • DB upgrade with 2nd RCCB
  • 30+ power points
  • Concealed wiring
  • LEW testing

Related services

BTO New Wiring - Tampines North Drive 1 - HDB - BTO 4 Room - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
HDBHDB BTO Wiring

BTO New Wiring - Tampines North Drive 1

Location
Blk 609A Tampines North Drive 1, BTO
Property type
HDB - BTO 4 Room
Service
HDB BTO Wiring
Compliance
LEW endorsement, full testing and documentation

First-time wiring for a 4-room BTO bare unit at Tampines North Drive 1. As a bare unit, the wiring was sequenced before carpentry, which is the ideal time. BestVolt installed concealed conduits throughout, dressed the DB with neat labelling, and provided 32 power points with USB-C, data points in the living room and bedrooms, TV points, and LED downlight points. The kitchen received 20A circuits for the hob and oven. All cables are copper, tested and documented, with LEW endorsement included. A reliable reference for BTO owners and ID firms looking for an electrical subcontractor.

What we did

  • Bare unit new wiring
  • Concealed conduit
  • DB box dressing
  • 32 power points with USB-C
  • Data + TV points
  • LED downlights

Related services

Complete Electrical Rewiring - Jalan Mata Ayer - Landed House - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
LandedLanded Rewiring

Complete Electrical Rewiring - Jalan Mata Ayer

Location
24 Jalan Mata Ayer, Sembawang
Property type
Landed House
Service
Landed Rewiring
Compliance
RCCB trip test, LEW endorsement, SP clearance

Located in Sembawang, this 2-storey landed home at Jalan Mata Ayer had frequent power trips and warm sockets. Our survey found undersized cables and no RCCB. BestVolt carried out a full house rewiring with a new main DB and a sub-DB for the second floor, separate 20A circuits for aircons and the water heater, and rewired the auto-gate and garden lighting. Concealed wiring was used for interiors and surface trunking for the car porch. All copper cables, RCCB trip tested, and LEW-endorsed with SP clearance. Completed with minimal hacking and repaint touch-up guidance.

What we did

  • Full house rewiring, 2 storeys
  • Main DB + sub-DB
  • Outdoor gate and garden lights
  • Concealed + trunking mix
  • SP testing

Related services

Industrial Unit Wiring - TENET 87 Tampines - Industrial - Factory - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
IndustrialIndustrial Rewiring

Industrial Unit Wiring - TENET 87 Tampines

Location
TENET 87 Tampines North Street 62, Industrial
Property type
Industrial - Factory
Service
Industrial Rewiring
Compliance
JTC submission, final testing and documentation

This industrial unit at TENET 87, Tampines North Street 62 required a sub-DB from the main MDB and 3-phase circuits for heavy machines. BestVolt installed the sub-DB, 3-phase sockets, office and warehouse lighting and power, and metal trunking for cable management, and handled the JTC submission. Works included shutdown planning, after-hours installation, and final testing with documentation. A strong case study for industrial electrical subcontracting for ID and M&E firms.

What we did

  • Sub-DB installation
  • 3-phase circuits
  • Office + warehouse wiring
  • Metal trunking
  • JTC submission

Related services

HDB Resale Rewiring - Telok Blangah Crescent - HDB - 3/4 Room - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
HDBHDB Rewiring

HDB Resale Rewiring - Telok Blangah Crescent

Location
8 Telok Blangah Crescent, HDB
Property type
HDB - 3/4 Room
Service
HDB Rewiring
Compliance
HDB compliance, LEW testing

An old HDB flat at 8 Telok Blangah Crescent with frequent power trips, a burnt socket smell and no RCCB. Full replacement of the old wiring was the safest option. BestVolt replaced all cables with copper, installed a new DB with RCCB, fixed the power trips by balancing loads, and added 20+ power points for modern appliances. A combination of concealed wiring and neat surface trunking was used where hacking was not practical, followed by LEW testing and handover.

What we did

  • Full old wiring replacement
  • New DB with RCCB
  • Power trip fixed
  • 20+ power points
  • Concealed + trunking

Related services

Factory Wiring - TENET 71 Tampines North - Industrial - Factory - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
IndustrialIndustrial Rewiring

Factory Wiring - TENET 71 Tampines North

Location
TENET 71 Tampines North Street 62, Industrial
Property type
Industrial - Factory
Service
Industrial Rewiring
Compliance
Compliance testing, test records at handover

This factory unit at TENET 71, Tampines North Street 62 required separation of office and production electrical loads. BestVolt installed a new DB with separate sections for the office (lighting, workstations, aircon) and the factory floor (3-phase sockets for machines). Surface metal trunking was used for durability, with 3-phase power points for equipment and testing for compliance. Installation was carried out after hours to avoid disrupting operations, and handover included test records. A good example for SME factory owners.

What we did

  • DB upgrade
  • 3-phase power
  • Office + factory circuits
  • Surface metal trunking
  • Compliance testing

Related services

Commercial & Industrial Wiring - Ubi Avenue 1 - Industrial / Commercial - Image 01 by BestVolt Contractors Singapore - Electrical Rewiring Project
CommercialCommercial & Industrial Rewiring

Commercial & Industrial Wiring - Ubi Avenue 1

Location
337 Ubi Avenue 1, Ubi, Singapore
Property type
Industrial / Commercial
Service
Commercial & Industrial Rewiring
Compliance
Compliance check and testing

This commercial and industrial unit at 337 Ubi Avenue 1 needed a DB replacement and power points for office workstations. Works were scheduled after hours to avoid business disruption. BestVolt installed a new DB with labelled circuits, power points for 12 workstations, lighting circuits and emergency exit lights. A compliance check and testing were completed before handover.

What we did

  • DB box replacement
  • Office power points
  • Lighting circuits
  • Emergency circuits
  • Compliance check

Related services

Completed timber meter board by Best Volt, with a CHNT smart meter centred between isolators, an earth bar above, and the board drawing below, on an SP Group meter installation.
CommercialSP Group smart meter and meter board

SP Group Smart Meter & Meter Board

Location
Commercial unit, Singapore (block and unit not published)
Property type
Commercial unit
Service
SP Group smart meter and meter board

One commercial unit, one incoming package, not a full-unit rewire. Block and unit are not on the photos, so they are not stated. BestVolt dressed a timber meter board with a CHNT/Itron single-phase, two-wire smart meter, 230V, year of manufacture 2025, marked Property of SP Group. Isolators sit either side of the meter, an earth bar above, and the board drawing below. A new Cm consumer unit and isolator stand beside the timber board, so incoming and distribution read as one system. In-progress frames show brown, blue and grey loops dressed into blue wall trunking, the board inside the unit rather than left as a loose riser tail. A clear reference for an SP Group meter board finished before the rest of the fit-out.

What we did

  • SP Group single-phase smart meter set on a timber board
  • Isolators either side, earth bar above, drawing kept on the board
  • New Cm consumer unit and isolator beside the meter board
  • Brown, blue and grey loops dressed into blue trunking
  • Incoming and distribution left readable as one system

Related services

Best Volt electrician terminating an open distribution board beside a timber meter board in a Singapore commercial unit.
CommercialDistribution board termination and wall mounting

Distribution Board Wiring & Mounting

Location
Two Singapore sites: the meter-board commercial unit and the Audanis Bakes unit
Property type
Commercial unit and F&B unit
Service
Distribution board termination and wall mounting

Read this project as board craft, not as one address. The first three frames are the commercial unit that also carries the SP Group meter board. BestVolt is at an open distribution board; the close frame shows the MCB row, an impact driver, cables labelled in the L1P1 series, and a socket marked L2P4. A wider frame shows the pull itself: coils on the floor, trunking already on the wall, the board still open. The last two frames are a different site, the white Audanis Bakes unit. There a small surface DB is mounted on the wall, green and blue cables drop from above, blue conduit enters from the side, and the finished board sits with two isolators below and a conduit drop from the ceiling. Two boards. Two sites. Not one job.

What we did

  • Open-board termination in the meter-board commercial unit
  • Circuit labels at the MCB row, including L1P1 and socket L2P4
  • Cable coils pulled up to that board, trunking already on the wall
  • Separate site: surface DB mounted in the Audanis Bakes unit
  • Finished wall DB with two isolators and a ceiling conduit drop

Related services

Night shopfront of Audanis Bakes with the sign lit and the shutter closed, the identity frame for a Best Volt F&B electrical fit-out.
F&BShopfront, escape lighting and ceiling first fix

Audanis Bakes - Shopfront & F&B Fit-Out

Location
Audanis Bakes, unit 01-07, Singapore (building name not published)
Property type
F&B tenancy
Service
Shopfront, escape lighting and ceiling first fix

One tenancy. The sign reads Audanis Bakes, and the door frame shows unit 01-07. That is the whole address the photos support. The night exterior has a curved block and a blue directional sign; the building name is not readable, so it is not stated. This scope is the shopfront, the escape lighting and the interior first fix, not a full rewire. Outside, the sign is on and the shutter is down. Inside, the unit is still a white shell, with a wall point under way beneath the sign. Above the front, the ceiling enclosure is opened from a ladder, cover off, glass below. The interior frame shows silver duct, fluorescent fittings and a gypsum partition. At the grille, a green EXIT sign sits with the security mesh: escape lighting and shutter-head electrics together.

What we did

  • Night shopfront with the Audanis Bakes sign on and the shutter down
  • Wall point in the white shell, under the sign at unit 01-07
  • Overhead ceiling enclosure opened and worked from a ladder
  • Silver duct, fluorescent fittings and gypsum partition first fix
  • Green EXIT sign at the security grille

Related services

Feature wall by Best Volt in a double-volume Singapore condominium, recessed niche, vertical LED cove on both sides, and a low cabinet below.
CondoFeature-wall lighting and vertical LED cove

Double-Volume Feature Lighting & LED Cove

Location
Private condominium, double-volume living, Singapore (address not published)
Property type
Condominium
Service
Feature-wall lighting and vertical LED cove

This is architectural lighting in one private condominium, not a full rewire. The address is not on the photos. A glass mezzanine rail, floor-to-ceiling glazing and a scaffold tell the volume; neighbouring condo blocks are visible through the glass, and no name on them can be read. The signature is a recessed feature niche, vertical LED cove on both sides, a low cabinet under it, and an air-con at the side. The scaffold goes to mezzanine height, with a high-wall air-con and the kitchen, oven included, in the background. One frame is the install still open: niche unfinished, tools down, scaffold up. The last frame is the result: vertical LED strip lit on a wood-slat wall, a loose cable still dropping from the ceiling. The bedroom coves in this same home are a separate project.

What we did

  • Recessed feature niche with a vertical LED cove each side
  • Scaffold carried to mezzanine height for the double volume
  • Floor-to-ceiling glazing and high-wall air-con coordinated around the work
  • Feature wall left open in the progress frame, then lit
  • Wood-slat wall finished with the vertical LED strip on

Related services

Finished bedroom cove ceiling by Best Volt, with a ceiling fan, downlights, and a three-panel window in a Singapore condominium.
CondoFalse-ceiling cove, fan point and switch drops

Bedroom Cove Ceiling, Fan Point & Switch Drops

Location
Private condominium, bedrooms and hallway, Singapore (address not published)
Property type
Condominium
Service
False-ceiling cove, fan point and switch drops

Same condominium as the double-volume feature lighting. Different scope, and not one bedroom photographed over and over. The hero is a finished cove ceiling: fan, downlights, three-panel window. A second room, seen from the door, has the same cove and fan against a full-height black window, with a two-gang switch at the door. A third opens to a balcony through a sliding door, cove already lit, switch in place. A fourth frame is deliberately unfinished, cove on but cable still out at the corner, air-con indoor unit in the room, so the final fix is not pretended. The last frame leaves the bedrooms: a hallway switch drop beside a cabinet, loose cable still hanging. Cove, fan point, and the drop that feeds the switch. Not a full-unit rewire.

What we did

  • Finished cove ceiling with fan and downlights, three-panel window
  • Second room: full-height window, cove, fan, two-gang switch
  • Third room: balcony slider, cove lit, switch in place
  • Progress frame kept, with cable still out at the cove corner
  • Hallway switch drop, not only the finished ceilings

Related services

Double-height residence with a glass-globe bubble chandelier, skylight, marble wall, and gold linear LED, installed by Best Volt.
ResidenceFeature lighting fit-out

Luxury Residence Feature Lighting

Location
Private residence, Singapore (address not published)
Property type
Private residence
Service
Feature lighting fit-out

One residence. No address on the photos, so none is stated. This is a feature-lighting fit-out, not a full-house rewiring case study. The volume is double height: a glass-globe bubble chandelier, a skylight, a marble wall and a gold linear LED. The television wall is wood slat, with a warm LED niche in the cabinet, cove ceiling, fan and track lights. A wider living frame shows the cove lit and a pendant against the marble. The stair is dark timber, tread lights in the steps, handrail lit, an air-con on the landing above. The kitchen of this same house carries the hood, the oven, under-cabinet LED and the sink cutout, so lighting and appliance circuits sit in one frame.

What we did

  • Glass-globe chandelier in the double height, with gold linear LED
  • Television wall: wood slat, warm LED niche, cove, fan, track lights
  • Living cove and marble-wall pendant
  • Staircase tread lights and handrail lighting
  • Kitchen under-cabinet LED, with hood and oven circuits in frame

Related services

Close-up of wall chasing by Best Volt, dust, a paper catch, tape, and a cable bundle beside the cut in a private residence.
ResidenceConcealed wiring, wall chasing and smart switch

Concealed Wiring, Chasing & Smart Switch

Location
Private residence, Singapore (address not published)
Property type
Private residence
Service
Concealed wiring, wall chasing and smart switch

Same residence as the chandelier, the stair lights and the wood-slat television wall. This project is the concealed path that those fittings sit on, not a second address and not a full rewire. It opens on the chase itself: dust, a paper catch, tape and a cable bundle at the cut. A rotary hammer is on the wall, the lit kitchen cabinets and the stair behind it, so the chase is in this house and not a generic detail. Another cut runs beside the marble feature wall, pendant and wood slat still in frame. A partition takes a further chase, yellow tape on the drop, the chandelier hall and the gold LED visible through. The result is a three-gang smart switch, blue indicator on each gang. The brand mark is too small to confirm, so it is not named.

What we did

  • Wall chase cut, with paper catch and tape at the opening
  • Rotary-hammer chasing, stair and kitchen of this house in frame
  • Chase run beside the marble feature wall
  • Partition chase with a taped cable drop
  • Three-gang smart switch, blue indicator on each gang

Related services

Finished office lighting by Best Volt, coloured geometric pendants lit over the desks with the city beyond a glass facade.
OfficeOffice lighting fit-out

Office Lighting Fit-Out

Location
Office, Singapore (address not published)
Property type
Office
Service
Office lighting fit-out

One office. Black ceiling, glass facade, city beyond. Not a factory rewire, and not a second floor spliced in. The finished frame leads: coloured geometric pendants on over the desks. An evening wide shot of the same floor holds two pendants, a cassette air-con and a green EXIT sign. Before that, the ceiling is still open: black pipes, conduit and cable, services coordinated rather than buried unseen. Two later frames are the same floor at two moments, not duplicates: a linear fitting going up from a ladder against a glass partition, then cable drops still hanging while two of the crew dress them, facade behind, ceiling not yet closed. Feature light, escape light, and the ceiling services that carry both. Address not shown, so not stated.

What we did

  • Coloured geometric pendants lit over the desks
  • Floor coordinated with cassette air-con and a green EXIT sign
  • Open ceiling: black pipes, conduit and cable set out
  • Linear fitting mounted from a ladder on the black ceiling
  • Cable drops dressed on the same floor before the ceiling closed

Related services

Genie GS-1930 scissor lift raised to a linear light, mezzanine stair behind, during a Best Volt high-access lighting installation.
CommercialMezzanine lighting and high-access installation

Mezzanine Lighting & High-Access Installation

Location
Unit with a steel mezzanine, Singapore (address not published)
Property type
Unit with steel mezzanine
Service
Mezzanine lighting and high-access installation

One unit. Black steel mezzanine, stair, and a yellow exterior wall in the completed frame. No address is readable, so none is stated. The scope is lighting and the access it took, not a factory rewire and not a full-unit power package. A Genie GS-1930 scissor lift is up at a linear fitting, the mezzanine stair behind it. The crew is on the mezzanine itself, ladder and lift in the same volume, which is the scale of the job. Trunking and conduit run along the top of the mezzanine, with a ladder still in use on the floor below. A linear track is fixed from an A-frame against the black ceiling, lift parked behind. The result is an empty unit with rows of tube lights on, mezzanine and stair still in frame.

What we did

  • Linear fitting set from a Genie GS-1930 scissor lift
  • Crew working the black steel mezzanine, ladder and lift in frame
  • Trunking and conduit run on top of the mezzanine
  • Linear track fixed from an A-frame on the black ceiling
  • Rows of tube lights completed and switched on

Related services

Finished residential lighting by Best Volt, a dark ceiling fan with light and two black wall sconces switched on beside a large window.
ResidentialLighting layout, laser set-out and feature fittings

Lighting Layout, Laser Set-Out & Feature Fittings

Location
Several Singapore residences (service gallery, not one address)
Property type
Residences, more than one
Service
Lighting layout, laser set-out and feature fittings

Do not read these frames as one home. They are the lighting-layout method, collected across residences, and this project is a service gallery on purpose. One wall carries a hand-drawn light and fan layout beside a three-gang switch, with a gypsum patch where the point was made good. A separate flat shows the set-out itself: downlight openings in the ceiling and a green laser line, window grille at the side. The finished frames are three different rooms. A dark fan with a light, two black wall sconces on, a large window. A horizontal wall-wash LED and a socket by a balcony, a crane outside: a new build, no development name readable. A living room with a linear ceiling LED, a black fan, marble floor and a balcony slider. Plan, laser, fitting. Not one project, not one block.

What we did

  • Hand-drawn light and fan layout beside a three-gang switch
  • Downlight openings set out with a green laser line
  • Finished fan and two black wall sconces, a separate room
  • Horizontal wall-wash LED in a new build, crane outside
  • Linear ceiling LED, black fan and marble floor in another living room

Related services

Luxury bathroom by Best Volt, glass shower, wall-hung WC, timber vanity, and a warm LED niche in the mirror cabinet.
ResidentialKitchen, bathroom, air-con power and protection

Kitchen, Bathroom, Air-Con Power & Protection

Location
Several Singapore sites (service gallery, not one address)
Property type
Mixed residential
Service
Kitchen, bathroom, air-con power and protection

These circuits are scoped on their own. These frames are not one home, and we do not pretend they are. The bathroom is a glass shower, a wall-hung WC, a timber vanity and a warm LED niche in the mirror cabinet. It is not claimed as the luxury residence in the feature-lighting project. The kitchen is a different condominium: white cabinets, two Mitsubishi air-con units, an oven and a linear LED, not that residence's dark-wood kitchen. The air-con connection is an older flat again, the indoor unit still wrapped, yellow, blue and earth cables out. The protection frame is older gear on a timber panel: a voltage tester lit on a Schneider 63A 30mA RCBO, a MEM isolator off below it. A Cm emergency light sits over a door, blue LED panel beside it. No address on any frame.

What we did

  • Bathroom mirror cabinet with a warm LED niche
  • Kitchen final fix with two Mitsubishi air-con units and a linear LED
  • Air-con power connection in a separate, older flat
  • Existing Schneider 63A 30mA RCBO tested on an older timber panel
  • Cm emergency light set above a door

Related services

Gypsum partition with joint-compound patches and service openings, ladder and glass shutter in frame, a Best Volt first-fix shot from an F&B unit.
MixedContainment, partition first fix and making good

Containment, Partition First Fix & Making Good

Location
Several Singapore sites (service gallery, not one address)
Property type
Mixed: F&B, commercial and residential
Service
Containment, partition first fix and making good

This is how the rough work is closed, not a story of one address, and not a full-flat rewire. Two frames belong to the Audanis Bakes fit-out and are here for the method: a gypsum partition with joint-compound patches and service openings, glass shutter and ladder in frame; and, later, a caulking gun on the exit-grille frame in that same corridor. A separate frame shows sealant at a trunking joint above a Cm consumer unit; that site is not confirmed as the meter-board job, so it is not stated as the same board. Another is a ceiling-point final connection, cable loom to one side, trees and a gate outside, no address. The empty room is a resale flat: conduit and trunking lines on the ceiling, ceiling-rose holes, louvre windows. Route set-out only.

What we did

  • Gypsum partition openings and joint-compound patches, F&B first fix
  • Trunking joint sealed above a Cm consumer unit
  • Ceiling-point final connection, cable loom dressed at the opening
  • Conduit and trunking routes set out in an empty resale room
  • Exit-grille frame sealed with a caulking gun after the shopfront fit-out

Related services

How Each Project Is Delivered

The same steps sit behind every job on this page, whatever the property type.

  1. Site surveyWe check the existing wiring, DB and loads on site, then confirm the scope and quote.
  2. ApprovalsHDB permit, MCST approval or JTC submission is arranged where the scope needs it.
  3. InstallationWiring, DB, lighting and points installed to SS 638, concealed or in trunking.
  4. TestingInsulation resistance, earth continuity and RCCB tests, with LEW coordination and SP testing.
  5. HandoverTest records, a labelled DB schedule where a board is involved, and a walkthrough of the work.

What Our Clients Say About Our Work

Real reviews from homeowners and businesses, pulled from our Google Business Profile.

Planning a Rewiring Project Like These?

Whether it is an HDB resale flat, a condo unit, a landed home or a factory, every project starts with a site survey so the scope, approvals and testing are planned properly.

Book a free site survey with BestVolt Contractors and get a clear quote for your property.

Book a free site survey

Tell us about your property and the work you need, and we will get back to you to arrange a site visit.

Support Form (#3)

Prefer to talk? Call or WhatsApp +65 8927 1658.