- BCA-registered contractor
- bizSAFE Level 4
- LEW-endorsed installations
- Sunday-Saturday, 24/7
- +65 8927 1658
- sales@bestvoltcontractors.com
Power Point Installation in Singapore new & additional electrical points
Need an extra socket for a new appliance, more power points during a renovation, or a replacement for an old switch socket?
BestVolt Contractors installs new socket outlets, adds additional points, replaces existing sockets and plans dedicated appliance points for HDB flats, condominiums, landed homes and commercial spaces — based on the electrical requirements of the installation.
Call or WhatsApp +65 8927 1658
Registrations and Certificates You Can Check
Add the Power Points You Actually Need
Modern homes often have more appliances than the original electrical layout was designed around. A few well-positioned additional points make a room much easier to use without relying on extension cords and multi-plug adapters.
The exact point type, location and circuit arrangement depend on the appliance and the existing electrical installation.
Our installation service covers
- Additional power points for existing rooms
- New socket outlets during renovation
- Double power sockets
- Replacement of old switch socket outlets
- Wall socket installation
- Dedicated points for selected appliances
- Water heater switch and heater switch wiring
- USB socket installation
- 15A power points where required
- Socket points for offices, shops and commercial spaces
Recent Power Point Projects
Extra points, dedicated circuits and air-con power added in flats, condos and landed homes.
Complete Electrical Rewiring - Jalan Mata Ayer
24 Jalan Mata Ayer, Sembawang- Full house rewiring, 2 storeys
- Main DB + sub-DB
Orchid Park Condo - Full Rewiring & Power Points
81 Yishun Street 81, Orchid Park Condo- Full unit rewiring
- DB upgrade with 2nd RCCB
BTO New Wiring - Tampines North Drive 1
Blk 609A Tampines North Drive 1, BTO- Bare unit new wiring
- Concealed conduit
HDB Rewiring - Punggol Drive 635A
Blk 635A Punggol Drive, HDB- Full concealed rewiring
- DB with RCCB
HDB Resale Rewiring - Telok Blangah Crescent
8 Telok Blangah Crescent, HDB- Full old wiring replacement
- New DB with RCCB
Kitchen, Bathroom, Air-Con Power & Protection
Several Singapore sites (service gallery, not one address)- Bathroom mirror cabinet with a warm LED niche
- Kitchen final fix with two Mitsubishi air-con units and a linear LED
Why BestVolt for Power Point Installation?
A socket is a small job that still deserves a properly planned scope.
Practical Electrical Planning
We look at the intended use of each point rather than treating every socket installation as the same job.
Clear Scope Before Work
The quotation identifies the number of points, socket type, wiring method and other relevant installation requirements.
Renovation or Standalone
Additional points can be planned as part of a wider renovation or requested as a separate electrical service.
Testing and Proper Handover
Completed work is checked before handover, with wider testing and compliance requirements addressed where applicable.
What Our Clients Say About Our Work
Real reviews from homeowners and businesses, pulled from our Google Business Profile.
When Do You Need an Additional Power Point?
You may need additional points when the existing sockets no longer match how the room is actually used.
You Are Adding New Appliances
Installing another refrigerator, washing machine, air-conditioner, induction hob or similar appliance may require a properly planned electrical point.
Existing Sockets Are Too Far Away
If you regularly rely on extension leads because a socket sits in an inconvenient spot, a new point gives a cleaner and more practical arrangement.
You Are Renovating
Renovation is often the easiest time to add points, because wiring routes, walls, cabinetry and furniture layouts can all be planned together.
You Need More Points in a Home Office
Desktops, monitors, printers, routers and chargers use up sockets quickly. Additional outlets can be positioned around the intended workstation.
You Are Upgrading a Kitchen
Kitchen appliances have different electrical requirements. Socket locations should be planned around the final cabinet and appliance layout rather than added afterwards.
You Are Adding a Water Heater
A water heater may require an appropriate switch and electrical connection rather than simply using a standard socket.
What Does Power Point Installation Include?
The scope depends on what you are installing and where the new point needs to sit.
New Power Point Installation
A new electrical point can be added where an existing circuit and installation conditions allow it. The work may involve:
- Cable routing
- Socket outlet installation
- Switch installation where required
- Connection to the appropriate circuit
- Surface trunking or concealed wiring, depending on the site
- Testing after installation
Additional Power Points
If you already have points but need more, we assess the existing circuit arrangement and determine the appropriate way to add them. Particularly useful for:
- Bedrooms
- Living rooms
- Home offices
- Kitchens
- Study areas
- Commercial workspaces
Switch Socket Outlet Replacement
Old, damaged or inconveniently configured socket outlets can be replaced as part of an electrical upgrade.
The replacement should match the existing wiring and intended electrical load rather than being treated as a purely cosmetic change.
Power Socket Options for Different Requirements
Not every electrical point needs to be the same.
Standard Power Socket
Suitable for everyday appliances and general room use where the existing circuit arrangement supports the additional point.
Double Power Socket
A practical option when two appliances or devices need to be connected in the same location.
USB Socket
USB and USB-C socket plates provide charging directly from the wall — useful around bedrooms, study areas and home offices.
15A Power Point
Some higher-powered appliances need a different outlet arrangement. A 15A point should be installed according to the appliance requirement and circuit design.
Water Heater Switch
Water heater installations require appropriate switching and wiring. The correct arrangement depends on the heater and the existing electrical installation.
Concealed Wiring for New Points
Where practical, cables can be routed within the wall so the finished installation is less visible. This is commonly considered during renovation, when walls are already being opened.
Concealed routes need to be decided before finishes go back on, so the socket and switch positions should be confirmed early.
Surface Trunking
Where wall hacking is not practical or permitted, surface trunking provides a more straightforward route for new cables and keeps future access easy.
The final approach depends on the site, the required cable route and the finish you want.
Power Point Installation During Renovation
Renovation is one of the best times to review your electrical point layout. Before carpentry, tiling and finishes are completed, you can plan where sockets and switches will actually be needed.
Planning these locations early reduces the need for visible wiring or later modifications.
Worth planning before finishes
- Bedside power points
- TV and media points
- Kitchen appliance sockets
- Washing machine and dryer points
- Work-from-home sockets
- Study desk outlets
- Water heater switches
- Additional living-room sockets
- Appliance points inside or around cabinetry
Do You Need a New Circuit or Just an Additional Socket?
Adding a socket does not always mean simply extending an existing point. For higher electrical demand, a new or upgraded circuit may be more suitable than adding another outlet to an existing circuit.
If the property needs more overall supply capacity, that is a separate assessment.
The right approach depends on
- Existing circuit capacity
- Number of points already connected
- Intended appliance load
- Appliance type
- Existing DB arrangement
- Cable routing
- Whether a dedicated circuit is appropriate
Power Point Installation for HDB, Condo, Landed and Commercial
The installation method follows the property and the site conditions, not a standard package.
HDB Flats
Additional sockets are commonly planned around renovation layouts, kitchen appliances, bedrooms, study areas and living spaces. Where concealed wiring or wall works are involved, the approach is considered together with the renovation scope. See HDB rewiring.
Condominiums
Condo installations may need to account for building management requirements, working hours and existing wiring routes. The final method depends on the unit and site conditions. See condo rewiring.
Landed Houses
Larger homes have more rooms, longer cable routes and more appliance points. Additional points can be planned as part of a wider landed house rewiring or renovation.
Commercial Spaces
Offices, shops, salons and other premises may need extra sockets for workstations, equipment, displays and appliances. For larger projects, see commercial rewiring.
What Affects the Cost of Adding a Power Point?
The cost depends on the actual installation rather than the socket plate itself. The same power point installation can have very different requirements from one property to another.
An itemised quotation should clearly show what is included in the work.
Important cost factors
- Number of new points
- Distance from the existing circuit
- Cable routing
- Concealed wiring or surface trunking
- Wall access and finishing requirements
- Socket and switch type
- Whether a dedicated circuit is required
- Appliance load
- Property type
- Renovation stage
- Existing electrical condition
Our Power Point Installation Process
Five straightforward steps, from your requirement to a tested installation.
- Tell Us What You NeedShare the property type, room, intended appliance or equipment and the number of new points required.
- Check the Existing InstallationWe assess the relevant electrical points, circuit arrangement and a practical cable route.
- Confirm the Installation MethodDepending on the site, the work may use concealed wiring or surface trunking.
- Install the New PointsThe selected sockets, switches and associated wiring are installed according to the agreed scope.
- Test the InstallationThe completed electrical work is checked before handover, with wider testing and compliance coordinated where the work forms part of a larger project.
Why Plan Your Socket Layout First?
A socket is most useful when it sits where the appliance or equipment will actually be used. Before installation, consider:
- Where furniture will be placed
- Where appliances will sit
- Which devices need permanent power
- Which sockets need to remain accessible
- Whether multiple appliances will operate together
- Whether future equipment may be added
This matters most in kitchens, home offices and entertainment areas, where a badly placed socket becomes inconvenient very quickly.
Power Points as Part of a Larger Upgrade
Additional sockets are sometimes only one part of a bigger electrical requirement. A renovation can run: new power points → additional circuits → DB box upgrade → electrical loading assessment.
If the existing distribution board or supply capacity cannot comfortably support the planned demand, adding more sockets alone will not solve the underlying issue.
Power Point Questions We Often Get
How much does it cost to add a power point in Singapore?
It depends on the number of points, wiring distance, installation method, socket type, property conditions and whether additional circuit work is required. A clear scope lets us give an itemised quotation rather than assuming every installation costs the same.
Can I add a power point without rewiring the whole house?
In many cases yes. The existing circuit, cable route and electrical load should be checked first — if the installation is old, overloaded or unsuitable for the intended appliance, wider electrical work may be recommended.
Can you install a power point during renovation?
Yes. Renovation is often the most practical time, because the electrical layout can be coordinated with walls, cabinetry, appliances and furniture, and concealed wiring is easier to arrange before finishes are completed.
Can I install a USB or USB-C wall socket?
USB and USB-C socket plates can be installed where the selected product suits the existing installation. The socket type should be chosen based on intended use and the existing wiring arrangement.
Do I need a separate circuit for a high-power appliance?
It depends on the appliance and the existing circuit. Some appliances need a dedicated circuit or a different connection rather than sharing a general-purpose socket circuit, so the load should be assessed before installation.
Can you install a 15A power point?
Where a 15A outlet is appropriate for the appliance and installation, it can be included in the scope. The circuit, cable sizing, protection and appliance requirements are checked rather than treating it as a simple socket swap.
Related Electrical Services
Where the requirements overlap, these works are planned together.
Electrical Rewiring Services
Full and partial rewiring scopes, methods, testing and handover.
DB Box Upgrade
Distribution board upgrade, RCCB protection and circuit labelling.
Electrical Loading Upgrade
Supply capacity assessment, LEW and SP Group coordination.
Testing & Compliance
LEW inspection, testing, endorsement and submissions.
Need More Power Points in Your Home or Business?
Whether you need one additional socket or a larger installation as part of a renovation, the right solution starts with your existing wiring and what you plan to connect. Tell us the property type, where the new point is needed, what it will power, how many points you want and whether the property is being renovated — and we will send an itemised quotation based on the actual scope.
- BESTVOLT CONTRACTORS PTE. LTD.
- 406 Pandan Gardens, #14-38, Singapore 600406
- Phone / WhatsApp: +65 8927 1658
- Email: sales@bestvoltcontractors.com
Request an itemised quote
Tell us the room, the appliance and how many points you need, and we will quote the actual scope.
Prefer to talk? Call or WhatsApp +65 8927 1658.