- BCA-registered contractor
- bizSAFE Level 4
- LEW-endorsed installations
- Sunday-Saturday, 24/7
- +65 8927 1658
- sales@bestvoltcontractors.com
Renovation Electrical Works in Singapore new wiring for bare units and fit-outs
Renovation electrical work needs to be planned before the walls are closed, carpentry goes in and ceilings are finished.
BestVolt Contractors handles the wiring and installation required during renovation — from new wiring in a bare unit to additional power points, lighting circuits, switches, DB work and final testing. The scope is planned around your renovation layout so the wiring goes in at the right stage instead of being added after other works are complete.
Call or WhatsApp +65 8927 1658
Registrations and Certificates You Can Check
Plan the Wiring Before the Renovation Gets Too Far
Electrical work is one of those parts of a renovation that becomes difficult to change once walls, ceilings and carpentry are finished.
A good renovation wiring plan is not simply about putting more sockets around the property. Circuits, cable routes, protection devices and electrical points need to work together with the final layout — which is why the scope should be discussed while the renovation plans are still being finalised.
The layout should account for
- Air-conditioners and other dedicated appliances
- Kitchen appliances and worktops
- Refrigerators and washing machines
- Water heaters
- TVs and entertainment areas
- Work desks and home offices
- Lighting points and switches
- Additional electrical points
- Future appliances or equipment
- DB box and circuit requirements
Recent Renovation Wiring Projects
Wiring, lighting and first fix carried out alongside renovation and carpentry works.
BTO New Wiring - Tampines North Drive 1
Blk 609A Tampines North Drive 1, BTO- Bare unit new wiring
- Concealed conduit
Double-Volume Feature Lighting & LED Cove
Private condominium, double-volume living, Singapore (address not published)- Recessed feature niche with a vertical LED cove each side
- Scaffold carried to mezzanine height for the double volume
Bedroom Cove Ceiling, Fan Point & Switch Drops
Private condominium, bedrooms and hallway, Singapore (address not published)- Finished cove ceiling with fan and downlights, three-panel window
- Second room: full-height window, cove, fan, two-gang switch
Luxury Residence Feature Lighting
Private residence, Singapore (address not published)- Glass-globe chandelier in the double height, with gold linear LED
- Television wall: wood slat, warm LED niche, cove, fan, track lights
Lighting Layout, Laser Set-Out & Feature Fittings
Several Singapore residences (service gallery, not one address)- Hand-drawn light and fan layout beside a three-gang switch
- Downlight openings set out with a green laser line
Containment, Partition First Fix & Making Good
Several Singapore sites (service gallery, not one address)- Gypsum partition openings and joint-compound patches, F&B first fix
- Trunking joint sealed above a Cm consumer unit
Why Electrical Work Should Come Before Carpentry
One of the most common renovation problems is deciding the electrical layout too late. Once carpentry, feature walls and false ceilings are completed, changing a wiring route becomes far more disruptive. The exact sequence can shift depending on the renovation contractor, ID programme and property conditions.
- Review the Renovation LayoutIdentify rooms, appliances, lighting positions, furniture and electrical requirements from the drawings.
- Plan the Points and CircuitsDetermine where new wiring, sockets, switches and dedicated circuits are required.
- Confirm the Wiring RoutesDecide whether cables run concealed, through ceilings or using suitable surface methods.
- Install the WiringWiring is installed before the relevant walls, ceilings or carpentry works are closed.
- Install Electrical AccessoriesSockets, switches, lighting connections and other selected components go in at the appropriate stage.
- Test and Hand OverThe completed installation is tested, with DB labelling and the required documentation addressed before completion.
What Our Clients Say About Our Work
Real reviews from homeowners and businesses, pulled from our Google Business Profile.
New Electrical Wiring for Bare Units and Renovations
A bare unit gives you more flexibility, because the electrical layout can be planned before finishes and fixed furniture are installed.
New Wiring Installation
New cables are routed to the required lighting, socket and appliance points based on the proposed floor plan.
Electrical Point Installation
Power points, switches, lighting points and dedicated appliance points are positioned according to how each room will be used.
Circuit Planning
Different appliances and areas may need separate circuits rather than placing everything onto the existing wiring.
DB Box and Protection
The distribution board and protective devices are reviewed as part of the scope, particularly where the property is taking on additional loads.
Concealed Wiring
Where the renovation allows wall or ceiling works, wiring can be concealed for a cleaner finish. Where hacking is unsuitable, surface trunking or other routing is considered instead.
What Should Be Decided Before Installation?
The layout should follow the actual renovation design rather than being decided room by room after work has started. Planning these points early reduces the chance of cutting into finished surfaces later.
| Area | Electrical planning to consider |
|---|---|
| Living room | TV point, general sockets, lighting and future equipment |
| Bedrooms | Bedside sockets, lighting, switches and work areas |
| Kitchen | Appliance points, worktop sockets and dedicated circuits |
| Bathroom | Water heater and required electrical points |
| Dining area | Lighting and appliance or charging points |
| Study / work area | Multiple sockets, equipment and data requirements |
| Utility area | Washing machine, dryer and other appliances |
| Air-conditioning | Dedicated electrical supply and circuit requirements |
Renovation Electrical Works for Resale and New Units
Electrical requirements differ considerably with the condition of the property.
Resale Property Renovation
An older property may have existing wiring that needs to be assessed before new points are added.
If the existing installation is unsuitable for the planned renovation, partial or full rewiring may need to be considered instead of simply extending old circuits — see electrical rewiring services.
Bare or New Unit Fit-Out
A bare unit lets you plan the installation around the final layout from the beginning — useful when the renovation involves significant changes to:
- Room layouts
- Lighting positions
- Kitchen configuration
- Air-conditioning
- Appliance locations
- Workstations
- Built-in carpentry
- Entertainment systems
Electrical Points for Renovation Projects
Renovation is often the point when owners realise the original number and location of points no longer suit how they use the space.
The key question is not simply how many sockets you need — it is whether the existing circuit arrangement can support the additional load.
Commonly added points
- Kitchen appliances
- Refrigerators and freezers
- Washing machines and dryers
- TVs
- Computers and monitors
- Charging devices
- Water heaters
- Air-conditioning
- Home office equipment
- Lighting
- Built-in appliances
Renovation Electrical Works vs Full Rewiring
Not every renovation requires a complete rewire.
| Renovation electrical work | Full / partial rewiring | |
|---|---|---|
| Focus | The electrical requirements of the renovation | Replacing existing wiring where required |
| Scope | Adds or relocates electrical points | Replaces selected or all existing circuits |
| Driven by | A new layout and how the space will be used | Existing wiring condition and capacity |
| Suitable when | Existing wiring remains appropriate | Wiring is ageing, damaged or unsuitable |
| Project role | Coordinated with renovation works | Can form the main electrical scope |
For a property that needs broader rewiring, use electrical rewiring services. For HDB-specific requirements and flat packages, see HDB rewiring.
Concealed Wiring During Renovation
Renovation is often the most practical time to consider concealed wiring, because walls and ceilings may already be opened. It gives a cleaner finish but needs proper planning of:
- Cable routes
- Wall chasing
- Ceiling access
- Electrical points
- Switch positions
- DB connections
- Appliance circuits
- Future accessibility
Where chasing or hacking is not practical, surface trunking is an alternative. The method should follow the property and scope rather than appearance alone — see concealed wiring and conduit work.
Coordinating With Your ID or Renovation Contractor
The position of a kitchen cabinet affects socket placement. A false ceiling affects lighting and cable routes. An air-conditioning layout affects dedicated circuits. So the electrical plan is reviewed against the renovation drawings before installation begins, coordinating with:
- Interior designers
- Renovation contractors
- Carpenters
- Ceiling contractors
- Air-conditioning contractors
- Plumbing works
- Lighting suppliers
- Appliance installers
For larger B2B projects, see electrical subcontracting for ID firms and contractors.
Electrical Loading and DB Requirements During Renovation
Adding more electrical points does not automatically mean the existing supply can support every new appliance.
Where the planned load is significantly different from the existing installation, the DB box, circuit arrangement and available loading should be reviewed. For a supply-capacity assessment see electrical loading upgrade; if the board itself is the constraint, see DB box upgrade.
Renovation loads often added
- Multiple air-conditioners
- Induction cooking
- Ovens
- Water heaters
- Dryers
- High-power kitchen appliances
- Additional equipment
Electrical Testing and Handover
An installation is not complete simply because the sockets, switches and lights are in place. The completed work should be checked and tested before handover.
The goal is to leave the renovation with an installation that is properly tested, identifiable and ready for use.
Depending on the scope
- Electrical circuit testing
- Protection-device testing
- Checking circuit connections
- DB circuit identification and labelling
- Testing of newly installed points
- LEW coordination and endorsement where required
- Relevant testing or submission requirements
What Your Renovation Electrical Scope Should Cover
Before work starts, make sure the quotation clearly explains what is included. That makes it possible to compare quotations on actual scope rather than on the final figure alone.
A useful scope identifies
- Number of lighting points
- Number and type of power points
- New or relocated switches
- Dedicated appliance circuits
- Wiring method
- Cable routing
- DB box work
- Protection devices
- Concealed or surface wiring
- Installation labour
- Testing
- Any required coordination or submission work
Why Plan the Electrical Scope Early?
Planning the electrical work early gives you more control over the finished renovation.
Most importantly, the electrical layout should follow how the space will actually be used — not simply where the existing sockets happen to be.
Early planning helps you
- Put sockets where they will actually be used
- Avoid unnecessary visible cables
- Coordinate appliance circuits
- Reduce late changes
- Avoid cutting into completed carpentry or finishes
- Identify loading or DB issues before installation
- Coordinate electrical work with the renovation schedule
Renovation Electrical Questions We Often Get
Do I need an electrician for renovation electrical work in Singapore?
Yes. Electrical installation should be planned and carried out appropriately for the property and project requirements, with the necessary testing, supervision and endorsement arrangements where applicable.
When should electrical wiring be done during a renovation?
Generally before the relevant walls, ceilings or carpentry are closed. The exact sequence depends on the renovation programme and coordination with the other trades.
Can you install new electrical wiring in a bare unit?
Yes. A bare unit can be planned for new wiring based on the proposed room layout, appliances, lighting and power requirements.
Can I add more power points without rewiring the whole property?
In some cases, yes. If the existing wiring and circuits are suitable, additional points may be possible without a full rewire — the existing installation and expected load should be assessed first. For straightforward additions, see power point installation.
Does renovation electrical work include concealed wiring?
It can. Where the renovation allows suitable wall or ceiling access, wiring can be concealed. Surface trunking or other routing may be used where concealed installation is not practical.
Do you work with interior designers and renovation contractors?
Yes. The electrical work can be coordinated with the renovation programme and the requirements of the ID or renovation team. For larger B2B projects we also offer electrical subcontracting.
Will I need a DB box upgrade during renovation?
Not necessarily. It depends on the existing board, protection devices, circuit arrangement and the loads being added. A site assessment determines whether an upgrade belongs in the scope.
Can renovation electrical work include testing and compliance?
Yes. The completed installation should be tested and the handover requirements addressed. Where applicable, LEW coordination and relevant testing or submission work can be included.
Related Electrical Services
Renovation electrical work usually overlaps with one or more of these.
Power Point Installation
Additional sockets, USB and 15A points, water heater switches.
Concealed Wiring
Concealed routes, conduit and neat surface trunking.
DB Box Upgrade
Distribution board upgrade, protection and circuit labelling.
Electrical Loading Upgrade
Supply capacity assessment, LEW and SP Group coordination.
Plan Your Renovation Electrical Works Before the Walls Close
Whether you are renovating a resale property, fitting out a bare unit or coordinating electrical work for an ID project, the layout should be settled before the renovation reaches the finishing stage. We can plan the wiring, points, circuits, DB requirements and installation around your renovation scope.
- BESTVOLT CONTRACTORS PTE. LTD.
- 406 Pandan Gardens, #14-38, Singapore 600406
- Phone / WhatsApp: +65 8927 1658
- Email: sales@bestvoltcontractors.com
Request an electrical site survey
Send the floor plan, appliance list and renovation stage, and we will scope the electrical works.
Prefer to talk? Call or WhatsApp +65 8927 1658.